VehiclesLosi Tenacity SCT 4WD Brushed
Losi Tenacity SCT 4WD Brushed
1/10 scale · LOS03024T1
- Final drive
- 12.97:1
- Tire
- 118mm
Open in Top Speedverified
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 12TStock | Stock |
| Spur | 40TStock | Stock |
| Transmission & axle | 3.89:1Stock | Stock |
| Spur ÷ pinion | 3.333:1Calculated | Calculated |
| Final drive | 12.97:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 118mmStock | Stock |
| Rollout | 28.6mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not published | |
| Battery | Up to 2SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | Not published | |
| Vehicle | ||
| Part number | LOS03024T1 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not published means it exists but no source we could find prints it.
How these numbers were settled
Brushed 550 12T, so no kV.
- Losi publishes the tire outside diameter directly on the product page as 4.65 in (118mm) for the Maxxis Razr short-course tire.
- This 3.89 internal is a different transmission from the 4.1353 the Tenacity DB Pro and TT Pro rows carry; the two are not in conflict.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.