VehiclesHobao Hyper VS2

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not published | |
| Spur | 48TStock | Stock |
| Transmission & axle | 3.31:1Stock | Stock |
| Final drive | Not published | |
| Wheels & tires | ||
| Tire diameter | Not published | |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | HB-VS2 | |
| Scale | 1/8 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Hobao sells no kits: every 1/8 is an ARR roller with tires fitted at the factory, so unlike the competition kits in this catalog its tire diameter is a real missing figure rather than a fact about the product.
- Hobao publishes none.
- Its marketing 3.3in tread figure is 84mm, which matches a 1/8 wheel rather than a 1/8 tire outside diameter of around 120mm, so it is not recorded.
- Nitro, engine not included.
- The clutch bell is unknown because Hobao's own sources disagree: the product page says 15T steel while the manual lists 16T or 17T for the Hyper 30 engine and 13T or 14T for the Hyper 21 and 28.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.
