VehiclesTamiya CC-02 Mercedes-Benz G 500

Tamiya CC-02 Mercedes-Benz G 500
1/10 scale · 58675
- Final drive
- 17.33:1
- Tire
- 90mm
Open in Top Speedsourced

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 16TStock | Stock |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | 17.33:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 90mmStock | Stock |
| Rollout | 16.3mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | 58675 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Tamiya gives 17.33:1 using the kit-standard 16T pinion.
- The pinion is published but the spur is not, so the transmission and axle ratio is left blank rather than back-calculated from an unpublished spur; the spur is unknown rather than not applicable.
- Brushed RS-540 motor included.
- Tires are 33/90mm front and rear.
- A 17.33:1 crawler-style reduction on 90mm tires gives a low single-digit mph top speed with any sane brushed 540, which is normal for this class and not an error.
- Unassembled kit with no battery; the motor is brushed, so KV and cell count do not apply.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.