VehiclesHPI Racing Savage XL Flux V2
HPI Racing
HPI Racing Savage XL Flux V2
1/8 scale · 160103
- Top speed
- 60mphcalculated
- Final drive
- 15.17:1
- Tire
- 160mm
Open in Top Speedverified
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 16TStock | Stock |
| Spur | 43TStock | Stock |
| Transmission & axle | 5.64:1Stock | Stock |
| Spur ÷ pinion | 2.688:1Calculated | Calculated |
| Final drive | 15.17:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 160mmStock | Stock |
| Rollout | 33.1mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | 2200KVStock | Stock |
| Battery | Up to 6SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | 60.3mph on 6SCalculated | Calculated |
| Motor speed | 48,840rpm, no loadCalculated | Calculated |
| Vehicle | ||
| Part number | 160103 | |
| Scale | 1/8 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. The top speed is kinematic: an ideal no-load RPM with no slip and no loss under load, so a real car is slower.
How these numbers were settled
Long-wheelbase Savage. Shares the Savage X Flux V2's transmission, gear chart, motor and tire; only the chassis length differs.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.