VehiclesLosi Mini-B 2WD Buggy
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 18TStock | Stock |
| Spur | 60TStock | Stock |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| Tire diameter | Not published | |
| Power | ||
| Motor | Not applicable | |
| Battery | Up to 2SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | LOS01016 | |
| Scale | 1/16 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Pinion and spur are each confirmed twice, on the spec table and in the parts list (LOS212022 18T pinion, LOS212016 60T spur).
- Same architecture as the Mini-T 2.0, with an unpublished reduction after the spur, so no ratio can be formed.
- Tire diameter is unpublished and the buggy runs different front and rear tires, so a single figure would need a choice Losi has not made.
- Brushed 280-size 47-turn motor, so no KV.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.