VehiclesLosi Mini-T 2.0 2WD
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 15TStock | Stock |
| Spur | 60TStock | Stock |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| Tire diameter | 55mmStock | Stock |
| Power | ||
| Motor | Not applicable | |
| Battery | Up to 2SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | LOS01015 | |
| Scale | 1/18 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Losi publishes pinion 15T, spur 60T, a 55mm outer diameter and a brushed 280-size 47-turn motor, but no internal ratio and no final drive. The total is not simply 60/15: the transmission parts list includes LOS212018 'Diff Gear, Idler Gear', so there is a further reduction after the spur whose tooth counts are unpublished.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.