VehiclesMST XXX-D S
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not applicable | |
| Spur | Not applicable | |
| Transmission & axle | 1.89:1Stock | Stock |
| Final drive | Not applicable | |
| Wheels & tires | ||
| Tire diameter | Not applicable | |
| Power | ||
| Motor | Not applicable | |
| Battery | Not published | |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | 532128 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Rear-motor shaft-driven 4WD with front and rear linked, so both ends turn together and there is no counter-steer figure to record unless a front one-way is fitted.
- Gear ratio 1.89 from a 34T/18T bevel set.
- The related XXX-D VIP manual carries a full chart built on the same 1.89, agreeing with the spec line.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.