VehiclesRedcat Racing Rampage MT V3
Redcat Racing
Redcat Racing Rampage MT V3
1/5 scale · monster truck
- Final drive
- 7.78:1
- Tire
- 212mm
Open in Top Speedsourced

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | 7.78:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 212mmStock | Stock |
| Rollout | 85.6mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Scale | 1/5 | |
| Class | Monster truck | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Gasoline, not electric: Redcat's tech-spec table lists a 32cc 2-stroke gasoline engine, so KV and cell count do not apply.
- Unusually, Redcat prints gearing and tire size directly: 'Gear Ratio: 7.78:1' and 'Tire Diameter: 212mm', both verbatim from the tech-spec table on the product page. 7.78:1 is the whole clutch-bell-to-wheel reduction, so it is recorded as the final drive.
- The clutch bell tooth count, the spur and the ratio after the spur are not published, so all three are left blank.
- Redcat labels the scale 'Large Scale' in the table; the product title says 1:5, which is what is recorded.
- Graded sourced, not verified: the figures are the manufacturer's own, but no second table reproducing them was found.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.