VehiclesTeam Losi Racing 8IGHT-XT (nitro)
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 13TStock | Stock |
| Spur | 48TStock | Stock |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| Tire diameter | Not applicable | |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | TLR04009 | |
| Scale | 1/8 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Nitro configuration of the TLR04009 combo truggy kit; the manual gives kit gearing as 13/48. TLR sells the diffs as complete ring and pinion sets with no tooth counts published, so the after-spur figure is unknown; it was NOT carried over from the 8IGHT-X buggy despite the shared part naming.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.