VehiclesHPI Racing Jumpshot MT Flux
HPI Racing
HPI Racing Jumpshot MT Flux
1/10 scale · 160030
- Top speed
- 54mphcalculated
- Final drive
- 11.66:1
- Tire
- 120mm
Open in Top Speedverified
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 21TStock | Stock |
| Spur | 90TStock | Stock |
| Transmission & axle | 2.72:1Stock | Stock |
| Spur ÷ pinion | 4.286:1Calculated | Calculated |
| Final drive | 11.66:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 120mmStock | Stock |
| Rollout | 32.3mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | 4000KVStock | Stock |
| Battery | Up to 3SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | 53.5mph on 3SCalculated | Calculated |
| Motor speed | 44,400rpm, no loadCalculated | Calculated |
| Vehicle | ||
| Part number | 160030 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. The top speed is kinematic: an ideal no-load RPM with no slip and no loss under load, so a real car is slower.
How these numbers were settled
Brushless version: Flux MMH-4000kV with the EMH-3S ESC, rated 2S or 3S. Geared taller than the brushed V2 (21T pinion instead of 17T).
Sources
- stdhpiracing.com (opens in a new tab)
- Manual (PDF)hpiracing.com (opens in a new tab)
- 115315hpiracing.com (opens in a new tab)
- 160030hpiracing.com (opens in a new tab)
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.