VehiclesTeam Associated RC10B84 Classic Kit
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not applicable | |
| Spur | Not published | |
| Transmission & axle | 2.50:1Stock | Stock |
| Final drive | Not applicable | |
| Wheels & tires | ||
| Tire diameter | Not applicable | |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | 90055 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Kit: pinion, tires and wheels are all on the required-to-complete list. Associated publishes the 2.50 transmission ratio for the 4WD car but the spur count is not stated on the spec page and the manual was not located.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.